Summer refrigerator power tips

With the arrival of summer, food preservation has been put on the agenda, and the use of refrigerators has also risen. In the season of skyrocketing electricity consumption, there are actually many ways to effectively use electrical appliances and reduce the cost of living. Here's a small series for you to briefly introduce the refrigerator power saving tips:

1. The refrigerator needs frequent defrosting and cleaning. If the frost thickness on the surface of the evaporator reaches 10 mm, the heat transfer efficiency will drop by more than 30%, that is, the cooling effect will be greatly reduced, resulting in the compressor running and increasing the power consumption.

2. Do not store hot items and uncovered and packaged wet foods. This will reduce the consumption of cold and prevent excessive frost formation.

3, there should be a certain gap between the food stored in the box to facilitate the convection of air-conditioning, so that the temperature inside the box is uniform. In general, small packages save energy compared to large packages.

4. When making ice cubes or storing cold beverages in bulk, cool them to room temperature and place them in the refrigerator at night. As the room temperature dropped at night and the door was not opened, the load of the unit was relatively reduced, achieving the purpose of saving electricity.

5, the temperature inside the refrigerator should be adjusted according to the needs of food storage, not blindly adjusted too low, can be properly adjusted to a higher temperature range, which can significantly reduce power consumption.

6. When power failure occurs suddenly, do not open the door to take food as much as possible to reduce the loss of cooling capacity.

7. When storing food in the freezer in a single-door refrigerator, you can put cold water in the freezer or aluminum lunch box in the freezer to make it freeze, which will make it more efficient than let the freezer be empty.