Accumulated a net profit of 139 million Taiwan dollars in the first half of 2011

[High-tech LED News] LED driver IC Taiwan Plant Accumulation Technology (3527) Benefited from strong demand in China's display market, Q2 revenue reached NT$ 528 million, a quarterly increase of 35%. Accumulated self-contained Q2 net profit before tax of 87.03 million yuan, the season increased by 53.8%. However, due to factors such as the appreciation of the New Taiwan dollar and the decline in product prices, net profit was still 28.8% lower than the same period of last year, and the pre-tax earnings per share was about 2.62 yuan.

In the first half of 2011, the accumulated revenue was NT$919 million, an increase of 4.5% year-on-year. The net profit after taxation was 139 million yuan, down 23.5% year-on-year. If the current share capital is 331 million yuan, the pre-tax profit per share is about 4.2 yuan.

At present, the industry's economy is turning conservative, but the demand in the mainland market is still hot. The legal person is optimistic about the accumulation of Q3 revenue is expected to grow faster than Q2, and has the opportunity to refresh the record high in single-season revenue.

Waterproof Vertical Mount D-Sub Connectors

waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.

These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.

Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.

Specifications

Current rating

Standard D-sub: 5 A

Hi-density D-sub: 2 A

Breakdown voltage: ≥ AC 500 V/1 minute

Insulation resistance: ≥ 500 MΩ @ DC 500 V

Contact resistance: ≤ 20 mΩ

Material

Contacts: copper alloy, gold-plated

Connector body: nylon 9T or PBT, UL Recognized

Shell: steel, nickel-plated

Applications

DV camcorder

DV VTR

Non-linear editing system

Broadcast monitor

Betacam deck

Antenk waterproof d-sub connectors including

Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof

Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,

right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof

Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com