Teach you how to use a TV box to connect multiple TVs

There are many televisions in the house, and there is only one TV box. It is not always possible to allocate one TV cable box per TV. In this way, a television box can be connected to multiple TV sets, and because a Network Cable is used as a transmission, a distance of up to 100 meters can be connected, and several floors of a house can be connected from the first floor to the top floor. In addition, warehouses, canteens, small dining halls and other places can also be used

The way is to use this "HDMI - network cable" converter, a router with a router to achieve multiple connections.

IPTV is connected to the converter through HDMI, and then the network is distributed through the router in the middle. A network cable divides multiple network cables and then converts them into HDMI signals through the converter to connect to the TV. See the network diagram below.

The advantage of this method is that the transmission is stable. Unlike wireless, it is not worried about signal interference and blocking. It can ensure that the distortion of video effects is reduced, especially for high-definition video, which requires strong transmission signals. And this way the transmission distance is long and there are no problems with many layers that can pass through the wall. Because it is cheap to use the network cable, it is very expensive to use the HDMI long cable.

Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.

CAT7 Lan Cable

The cat7 Lan Cable are an eight-core Shield wire. Each pair has a Shield layer (commonly called a Foil Shield), and then a Shield layer (commonly called a Braided screen Shield) outside the eight cores, with the same connection as the RJ-45.The highest transmission frequency of the CAT7 Ethernet Cable S/FTP is 600MHz, and the transmission frequency of the CAT7 network cable is 1000MHz.
There are a number of significant differences between the six and seven cabling systems, the most obvious of which is bandwidth.The CAT6 cable of channels provide a comprehensive attenuation to crosspoint ratio of at least 200MHZ and an overall bandwidth of 250MHZ. CAT7 of systems can provide at least 500MHZ of comprehensive attenuation to crosspoking ratio and 600MHZ of overall bandwidth.
The proliferation of broadband applications has created a need for more bandwidth.For example, a typical CAT7 channel can provide a bandwidth of 862MHZ for the transmission of video signals, analog audio signals on another pair, and high-speed LAN information on a third or fourth pair.
Another difference between the CAT6 patch cable and cat7 patch cable systems is their structure.The six types of wiring systems can use either UTP or STP.The seven types of systems are based only on shielded cables.In the cat7 network cables, each pair has a shield layer, and four pairs of wires together have a common shield layer.In terms of physical structure, the additional shielding layer makes the CAT7 Ethernet Cable have a larger diameter.

Another important difference is its ability to connect hardware. The parameters of the cat7 patch cable of systems require that all pairs of wires provide at least 60DB of integrated proximal winding at 600MHZ.The cat6 systems only require 43dB at 100MHZ and 46dB at 250MHZ for the cat6 patch cable.

Cat 7 Ethernet Cord,Cat7 Lan Cable,Cat 7 Ethernet Cable,Cat 7 Network Card

Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com