Pasterack, Inc., a leading provider of RF, microwave and millimeter wave products, has released a series of new active frequency multipliers that simplify system design by providing high output power levels.
Pasternack millimeter wave active frequency multiplier
The active frequency multiplier described above is an important component of the building blocks used in the local oscillator (LO) chain of radars, communication receivers and frequency sources, which expands the frequency and achieves optimum performance. These frequency multipliers support a variety of markets and applications including electronic warfare, electronic countermeasures, point-to-point wireless communications, VSAT wireless communications, test equipment and telecommunications infrastructure.
The PE88X series of active frequency multipliers (twice) doubles the input frequency of 4~23GHz to the required 8GHz~46GHz millimeter wave output frequency. These new products use the highly efficient GaAsPHEMT semiconductor technology with an integrated amplifier that produces an output power level of up to +17dBm with excellent fundamental and harmonic rejection, eliminating the need for external LO buffer amplifier stages and supporting circuitry. System requirements.
The above active frequency multiplier features the following: a single +5V DC power supply; the input/output RF end has a DC-blocker and a 50 ohm matching resistor; the fully sealed, compact plug-in package supports a field-replaceable 2.92mm connector; All models are RoHS and Reach compliant and MIL-STD environmental test conditions.
“ Pastronack 's new family of active frequency multipliers gives designers the ability to double-amplify frequencies up to 8 GHz to 46 GHz millimeters. These products use highly efficient GaAsPHEMT semiconductor technology in a compact coaxial package that produces up to +17 dBm. Output power, which eliminates the need for additional external components in system-level applications,†explains TimGalla, active device product manager at Pasternack. “Active multipliers typically require longer manufacturing cycles, but all three of Pasternack Models are available for immediate delivery."
The above new active frequency multipliers are stocked in the library and can be shipped at any time. You can get more information about these products at https:// For other questions, please call Pasternack China (Tel: +86-21-36558021).
1
Preparation of raw materials - including visual inspection of raw materials, chemical composition analysis, ingredients and weighing of various ingredients according to the calculation of ingredients. In addition, also includes refining agent, metamorphic agent drying and weighing.
2
Smelting - adding materials in a furnace in a certain order to melt them into alloys of uniform chemical composition.
3. Pre-furnace test -- after the alloy is evenly melted, sample and test to check whether various chemical components meet technical standards.
4
Adjustment of composition - If the chemical composition of one or more alloys is found to exceed the technical standard after testing, adjustment shall be made to make the chemical composition meet the technical standard.
5
Refining - After chemical composition requirements, a refining agent is used to remove dissolved gases and entrained solid particles from the alloy.
6
Refining metamorphism - adding appropriate refiner and modifier to aluminum alloy liquid to improve mechanical properties and mechanical cutting properties of the alloy, etc.
7
Casting -- casting aluminum alloy with qualified chemical composition, good metamorphism effect, gas content and slag content to meet the requirements into ingot, into bales.
8
Inspection and warehousing -- After inspection, aluminum alloy ingot with qualified chemical composition, gas content, inclusions, metamorphic effect, mechanical properties and appearance shall be stored as qualified productsAluminum Casting,Aluminum Casting Component,Aluminum Casting Machining,Machining Stainless Steel Component
Tianhui Machine Co.,Ltd , https://www.thcastings.com