Foshan lighting net profit drop is still sought after by institutions
Enter Foshan Lighting (000541) shares, view Foshan Lighting (000541) stock market
Yesterday, one of the "LED Sambo" - Foshan Lighting (000541, shares it) also announced this year's first quarterly report and last year's annual report: the company achieved a net profit of 212 million yuan last year, down 5.35%, earnings per share of 0.22 yuan, down 32.25%, 10 yuan 2.2 yuan; the first quarter of this year achieved a net profit of 276.55 million yuan, a year-on-year decline of 31.32%. Although the main financial indicators have declined, the quarterly report shows that the number of shareholders has decreased significantly compared to the end of last year, and several institutions have significantly increased their positions in the first quarter of this year.
Recommended reading
Will Huijin increase its holdings of the three major banks and raise their positions? The most explosive 6 big bull stocks today are 11 gold stocks ready to be issued. The brokers recommend 49 stocks are expected to bottom out and the death squads will be fired. Into the 20 strong stocks, 11 real estate stocks are still shown by the insurance heavyweight quarterly report, although the original Chinese shareholding of 148.96 million shares (000021, fund bar) has left the top ten tradable shareholders list in the first quarter, but the company's shareholders The number has decreased from 139,642 in the fourth quarter of last year to 113,257 in the end of the first quarter, a decrease of nearly 20%. According to the list of the top ten tradable shareholders, the funds that bought a large number of shares in the first quarter included the growth of GF GF (270002, fund), which held 10.5 million shares at the end of the first quarter, and the shareholding of Huaxia Shengshi, holding 10.2 million shares. They were 8,805,200 shares and 6,055,600 shares of Taixin Quality (290004, Funds) and Taixin Xianxing (290002, Funds) and the shareholding of 6,358,100 shares.
The key to the organization's optimism about the stock is its development prospects in the direction of energy-saving products. Recently, Foshan Lighting disclosed the issue of winning high-efficiency lighting products promotion projects in the national bidding. Among all the 9 projects, Foshan Lighting won 8 bids, which is the winning bidder with more varieties and complete specifications. According to the company, the quantity and amount of the winning bid will be implemented in accordance with the regulations of the relevant departments of the state after the public bid is announced. Although the company is still unable to predict the degree of impact on performance, but under the promotion of energy-saving emission reduction policies, the imagination is huge.
In the secondary market, the stock has entered a period of oscillating climbing since February of this year, and has risen 41.92% since February 3, and the funds involved in the previous period have already benefited a lot. However, from the current situation, the stock is still in a period of moderate heavy volume increase, and funds have been raised since April. The potential for future growth is greater.
[And the statement] This news is reproduced from the cooperation media of Hexun. The purpose of this article is to transmit more information, and does not mean to endorse its views or confirm its description. Article content is for reference only and does not constitute investment advice. Investors operate on this basis at their own risk.
1.0mm (.039″) Pitch Pin Headers
Overview
Antenk offers a variety of high quality and competitively priced 1.0mm pitch single, dual, three, quad row pin (male) headers used in many board-to-board PCB connections, fitting small-sized, densely-packed devices.
This low-profile component is made from high-temperature thermoplastic and is offered with several means of connections and mounting styles such as through-hole (THM) or surface mount (SMT) and can be in vertical (straight), elevated or at a right angle configuration/orientation dissipating current of about 1.0 A or less.
The pin (male) header is generally mated with receptacle or stackable header connectors (female sockets). This types of pin headers are suitable for PCB board to board connection or for signal transmission application.
Applications of 1.0mm Pitch Pin Headers
Its small size is most suitable for PCB connections of small equipment and devices such as WiFi equipment, gaming consoles, measurement instruments, and other equipment in need of a special interface to become interconnected
Mount Type: Through-hole vs Surface Mount
At one side of this pin header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.0mm vertical single row header, 1.0mm vertical dual row header, 1.0mm Elevated single row pin header, 1.0mm Elevated dual row pin Header, 1.0mm Right-angle single row header and 1.0mm Right-angle dual row header are some examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.0mm Right-angle Dual Row pin header, 1.0mm SMT Single row pin header, 1.0mm SMT Dual row pin header and 1.0mm Elevated Dual Row Pin Header are Antenk`s SMT pin headers.
Soldering Temperature for 1.0mm Pitch Pin Headers
Soldering SMT pin header can be done at a maximum peak temperature of 260°C for maximum 60 seconds.
Pin-Type: Vertical (Straight) and Right-Angle
1.0mm pitch headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle male header.
Vertical or Straight Pin (Male) Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.
Right-Angle Pin (Male) Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.
PCB Connector Stacking
Elevated Pin Header Orientation
Elevated pins aka Stacked Pins or Mezzanine are simply stacked pin headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.
Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical male pin header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-50 pins while for dual row, the number contacts may vary from 4-100 pins.
Pin Material
The pins of the connector have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Breakaway design
The pin headers are also equipped with a breakaway design making them fully compatible with their female receptacles.
Custom 1.0mm Pitch Pin Headers
Customizable 1.0 mm pitch pin headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
Male Header Pins,1.0Mm Male Header,1.0Mm Pin Header,1.0Mm Male Header Pins, 1.0mm THM Male Header, 1.0mm SMT Male Header
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com