Foshan will complete the renovation of 400,000 LED lamps in the next two years
The implementation plan proposes that, by 2012, on the basis of the construction demonstration project, the five districts and Dongping New City of the city will complete the renovation of the main street and tunnel LED lighting in phases, and the city will complete the installation of about 120,000 high-power LED street lights. , built a total length of more than 1400 km LED street light application road;
The main public places gradually use LED lighting products to complete the indoor LED lighting application project with an area of ​​about 180,000 square meters and a lighting area of ​​800,000 square meters. Applying about 100,000 LED lights to implement green lighting projects for the landmark buildings and landscapes in the city. Realize more than 80 million kWh of electricity per year.
Through the implementation of the demonstration project, the upgrading of lighting products in the roads, tunnels and large public buildings in Foshan City will be promoted in an all-round way, thus driving the development of LED-related products and industries in the city.
Cross-over Ethernet Cable is also called cross wire. When the crystal head made by different standards at both ends of the wire is T568A at one end and T568B at the other end, then it is the cross wiring mode.
The crossover cable is used to connect ADSL modems to the HUB HUB (related to the MODEM design, but not all), the HUB to HUB connection without a stage port, and the two computers to each other directly through the network card.The production method is basically the same as above, except that the online order is different from 568B, which adopts the method of exchanging 1-3,2-6, that is, one end is made with 568B and the other end with 568A.
Crossover Lan Cable,Crossover Network Cable,Ethernet Crossover Cable,Lan Cable Cross Connection
Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com