Copper Conductor Flat Wire Power Cable

Model NO.: YBF
Type: Low Voltage
Cross Section: 4mm2
Housing: Silicon Rubber or PVC
Trademark: Tianbao
Transport Package: Wooden Case
Specification: ISO9001
Origin: Chongqing China
HS Code: 85444921
Model NO.: YBF
Type: Low Voltage
Cross Section: 4mm2
Housing: Silicon Rubber or PVC
Trademark: Tianbao
Transport Package: Wooden Case
Specification: ISO9001
Origin: Chongqing China
HS Code: 85444921
Flexible Flat cables are produced by Q1320282,AQ001-91. It is applicable to the exchange rated voltage Uo / U of 450V/750V and below portable electrical equipment. The flat structure is especially applicable to the frequent bending occasions.

Technical requirements
1.Ac rated voltage:Uo/U=450v/750V
(Uo: refers to the rms voltage between any conductor and the ground.
U: refers to the rms voltage between any two conductors. )

2.Voltage service: In the acsystem, the working voltage is not greater 1.1 times than the rated voltage. And in Dc system,The working voltage is not greater 1.5 times than the rated voltage.

3.Wire core long-term working temperature:≤65ºC
4.Products standard:Q/32028AQ001-91

Standards		 Conductor structure Reference parameter of cable
20ºC min
insulated
resistance

Max extermal diameter		 G.W 20ºC max dc resistance

number x area
mm²
number x diameter
mm

Width x thickness
mm
kg/km		 tinned Ω/km untinned Ω/km Ω/km
3 x 4 56/0.30 19.6x8.9 285 4.95 5.09 50 400
3 x 6 84/0.30 22.0x9.9 380 3.3 3.39
3 x 10 80/0.40 27.5x12.0 615 1.91 1.95
3 x 16 126/0.40 31.1x13.3 830 1.21 1.24
3 x 25 196/0.40 38.3x15.8 1230 0.78 0.795
3 x 35 276/0.40 42.8x17.6 1605 0.554 565 40 300
3 x 50 396/0.40 49.2x20.0 2205 0.386 0.393
3 x 70 360/0.50 55.6x22.5 2965 0.272 0.277
3x4+2x1 56/0.30+32/0.20 25x8.5 427 4.92 5 50 400
3x 6+2x 1 84/0.30+32/0.20 30x12 590 3.3 3.34 50 400
3x4+2x1.5 84/0.30+32/0.25 30x12 600 3.3 3.38 50 400
6x2.5+6x1.5 49/0.25+30/0.25 35x15 900 7.98 8.05 50 400
3x4+4x2.5 56/0.30+49/0.25 32x9 520 4.95 5.03 50 400
3x25+1x10 196/0.40+84/0.40 53x18 1800 0.78 0.81 50 400
3x16+1x10 126/0.40+84/0.30 43x15 1200 1.21 1.27 50 400
3x35+2x10 276/0.40+84/0.40 61x21 2500 0.554 0.56 40 300
3x50+1x10 396/0.40+84/0.40 65x24 3200 0.386 0.392 40 300
4x2.5 49/0.25 22.5x8.2 285 7.98 8.21 50 400
4x4 56/0.30 26.2x9.1 396 4.95 5.09 50 400
4x6 84/0.30 29.2x9.9 505 3.3 3.39 50 400
4x10 84/0.30 36.5x12 835 19.1 1.95 50 400
4x25 196/0.40 51.1x15.8 1665 0.78 0.795 50 400
4x35 276/0.40 57.0x17.6 2170 0.54 0.565 40 300
7x2.5 49/0.25 37.2x8.2 490 7.98 8.21 50 300
8x1.5 30/0.25 33.4x7.0 380 13.3 13.7 50 300
8x2.5 49/0.25 41.6x8.2 555 7.98 8.21 50 300
10x1.5 30/0.25 40.3x7.0 465 13.3 13.7 50 400
10x2.5 49/0.25 50.4x8.2 680 7.98 8.21 50 400
12x1.5 30/0.25 48.3x70 565 13.3 13.7 50 400
12x2.5 49/0.25 60.5x8.2 820 7.98 8.21 50 400


*Advantage

1.Smooth and soft                                     5.High temperature resistant
2.Easy to fold and move                           6.Acid and alkali corrosion
3.Not easy to twist                                     7.Aging resistance
4.Flame retardant                                      8.High resistance pulse


Application
This product is applied to the AC(Alternating Current) rated voltage 0.6/1kV and below. Especially suitable for frequent bending or oil-resistant occasions for power plant or moving
lighting electricity power transmission.Product has good flexibility, aging resistance properties.
 
Contact Amy
  Flexible Flat cables are produced by Q1320282,AQ001-91. It is applicable to the exchange rated voltage Uo / U of 450V/750V and below portable electrical equipment. The flat structure is especially applicable to the frequent bending occasions.

Technical requirements
1.Ac rated voltage:Uo/U=450v/750V
(Uo: refers to the rms voltage between any conductor and the ground.
U: refers to the rms voltage between any two conductors. )

2.Voltage service: In the acsystem, the working voltage is not greater 1.1 times than the rated voltage. And in Dc system,The working voltage is not greater 1.5 times than the rated voltage.

3.Wire core long-term working temperature:≤65ºC
4.Products standard:Q/32028AQ001-91

Standards		 Conductor structure Reference parameter of cable
20ºC min
insulated
resistance

Max extermal diameter		 G.W 20ºC max dc resistance

number x area
mm²
number x diameter
mm

Width x thickness
mm
kg/km		 tinned Ω/km untinned Ω/km Ω/km
3 x 4 56/0.30 19.6x8.9 285 4.95 5.09 50 400
3 x 6 84/0.30 22.0x9.9 380 3.3 3.39
3 x 10 80/0.40 27.5x12.0 615 1.91 1.95
3 x 16 126/0.40 31.1x13.3 830 1.21 1.24
3 x 25 196/0.40 38.3x15.8 1230 0.78 0.795
3 x 35 276/0.40 42.8x17.6 1605 0.554 565 40 300
3 x 50 396/0.40 49.2x20.0 2205 0.386 0.393
3 x 70 360/0.50 55.6x22.5 2965 0.272 0.277
3x4+2x1 56/0.30+32/0.20 25x8.5 427 4.92 5 50 400
3x 6+2x 1 84/0.30+32/0.20 30x12 590 3.3 3.34 50 400
3x4+2x1.5 84/0.30+32/0.25 30x12 600 3.3 3.38 50 400
6x2.5+6x1.5 49/0.25+30/0.25 35x15 900 7.98 8.05 50 400
3x4+4x2.5 56/0.30+49/0.25 32x9 520 4.95 5.03 50 400
3x25+1x10 196/0.40+84/0.40 53x18 1800 0.78 0.81 50 400
3x16+1x10 126/0.40+84/0.30 43x15 1200 1.21 1.27 50 400
3x35+2x10 276/0.40+84/0.40 61x21 2500 0.554 0.56 40 300
3x50+1x10 396/0.40+84/0.40 65x24 3200 0.386 0.392 40 300
4x2.5 49/0.25 22.5x8.2 285 7.98 8.21 50 400
4x4 56/0.30 26.2x9.1 396 4.95 5.09 50 400
4x6 84/0.30 29.2x9.9 505 3.3 3.39 50 400
4x10 84/0.30 36.5x12 835 19.1 1.95 50 400
4x25 196/0.40 51.1x15.8 1665 0.78 0.795 50 400
4x35 276/0.40 57.0x17.6 2170 0.54 0.565 40 300
7x2.5 49/0.25 37.2x8.2 490 7.98 8.21 50 300
8x1.5 30/0.25 33.4x7.0 380 13.3 13.7 50 300
8x2.5 49/0.25 41.6x8.2 555 7.98 8.21 50 300
10x1.5 30/0.25 40.3x7.0 465 13.3 13.7 50 400
10x2.5 49/0.25 50.4x8.2 680 7.98 8.21 50 400
12x1.5 30/0.25 48.3x70 565 13.3 13.7 50 400
12x2.5 49/0.25 60.5x8.2 820 7.98 8.21 50 400


*Advantage

1.Smooth and soft                                     5.High temperature resistant
2.Easy to fold and move                           6.Acid and alkali corrosion
3.Not easy to twist                                     7.Aging resistance
4.Flame retardant                                      8.High resistance pulse


Application
This product is applied to the AC(Alternating Current) rated voltage 0.6/1kV and below. Especially suitable for frequent bending or oil-resistant occasions for power plant or moving
lighting electricity power transmission.Product has good flexibility, aging resistance properties.
 
Contact Amy
 

SCSI-180°DIP Section

Small computer system interface (SCSI) is an independent processor standard for system level interfaces between computers and intelligent devices (hard disks, floppy drives, optical drives, printers, scanners, etc.). SCSI is an intelligent universal interface standard.

1. SCSI can support multiple devices, SCSI-2 (fastscsi) can connect up to 7 SCSI devices, and widescsi-2 can connect 15 SCSI devices. In other words, all devices only need to occupy one IRQ. At the same time, SCSI also supports a wide range of devices, such as CD-ROM, DVD, CDR, hard disk, tape drive, scanner, etc.

2. SCSI also allows one device to transfer data and another device to look up its data. This can achieve higher performance in multitasking operating systems such as Linux and windows NT.

3. SCSI occupies a very low CPU, so it has obvious advantages in multitask system. Since the SCSI card itself has a CPU, it can handle all the transactions of SCSI devices. When the host CPU sends work instructions to the SCSI card, the SCSI card will work by itself. After the work is finished, the work results will be returned to the CPU. In the whole process, the CPU can carry out its own work.

4. The SCSI device is also intelligent. The SCSI card can queue CPU instructions by itself, which improves the work efficiency. In multitasking, the hard disk will be in the current head position, and the adjacent tasks will be completed first and then processed one by one.

5. The fastest SCSI bus has a bandwidth of 160MB / s, which requires the use of a 64 bit 66MHz PCI slot. Therefore, the maximum speed that can be achieved in the PCI-X bus standard is 80mb / s. if it is used with a dedicated hard disk with 10000rpm or 15000rpm, it will bring obvious performance improvement.

SCSI-180°DIP Section

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com