For music lovers or ordinary car owners, wonderful music can bring a better driving experience. The modified audio is not good to ask for assistance in debugging, and the car audio conversion is good or bad, in addition to the quality of the product, it also has a great relationship with the modification technology. Car audio conversion is a learning, not only need good equipment, sound insulation, but also need a reasonable match, the correct installation and adjustment can make a good sound, even the same equipment, different people install and debug, the sound is subtle Differences. You need to know the complete conversion plan, configuration, and even the process wiring to know the reason for the poor sound quality.
According to statistics, the cost of general modified audio is about 1000~7000 yuan. Then when it comes to modifying car audio, there are many car groups who admit that they are not quasi-professional audiophiles, so they only want to draw a little money to improve the music environment and music. Therefore, when choosing a car modification shop, it is often "what is cheaper to choose", and the reason of "one price per share" is forgotten, resulting in the final dissatisfaction with the modification effect.
Then we analyze why the car audio after the specific modification is always bad.
Car audio equipment is shoddy. Nowadays, there are many fake brand-name equipments flowing in the audio market. There are also many domestic brand-name devices, which have not been authenticated and do not meet the national quality standards. The skill target of such a device is very low, and the quality is very poor. Some machines have noise when they are turned on, and there is set noise when broadcasting music. This is a poor signal-to-noise ratio and is formed by a defective circuit. And there is no danger of safety. Some car owners have installed a set of audio at a lower price. Although it seems that the devices of the device are pretty good, they are basically fake and inferior goods. Using the audio system of these products, it is conceivable that the sound quality will be there. When noise is present, the music signal will be distorted.
Such devices usually have no skill targets, some have no place of origin and manufacturers, some fake American, Japanese or brand-name goods, these products have poor frequency response, there must be shortcomings when broadcasting music, can not reflect the music perfectly, especially It is equipped with an active low-sound gun, which makes the whole music disorder disorder, and even ambiguous like a pot of porridge.
Good sound quality should be high, medium and low sound level is very clear, like a lake clear water clear. This is like a comparison of the rotten peach half frame and the fairy peach. The multi-device fake device is not as good as the high-quality device with few devices.
The mismatch between the devices of the device is not a sound modification by stacking all the brand-name devices together. There was a car owner device that was an authentic international brand with twelve speakers, three of which were low-pitched and three amplifiers. The volume is not loud, and there is noise. The low-acoustic box planning scale has errors. The biggest problem is that the device is unreasonably arranged, the device is not used properly, and the device and debugging skills are very poor. These formation systems fail to function.
A good sound system equipment is not only a simple deployment, but also the most important thing is to fully promote the role of each device and explore the potential of the device. Others think that the device uses the same brand.
The car audio device of the device is a low-grade product. Although it is a brand-name product, each brand has low, medium and high-grade devices. Generally, the low-level device is very cheap. For example, the low-level single butterfly CD machine plus two pairs. Low-grade speakers, the price is only more than a thousand yuan, it seems that it is easy for brand-name customers to accept, but this is usually the practice of some businesses.
The average customer only sees the brand name, does not know that it is a low-grade product, and does not know the mismatch between the devices, especially the low-level speakers and even the high-pitched head, usually used for supporting low-power tape drives. The power is small, the sensitivity is high, and the distortion occurs when the volume is slightly enlarged. It is difficult to reflect the sound quality of the CD player.
The main performance is that the high-pitched area is even worse, the hoarse and sharp, the low-pitched sound control is poor, and sometimes the "shooting", the sound of the sound is like "flapping, fluttering" and so on. However, the low-grade products have poor sound quality, and some merchants will not tell the customers. Because the merchants want to catch customers with cheap psychology, they need to be cheap and want famous brands, so they will match the devices.
The skill of the technicians is poor. Most of the car's audio is semi-finished, and the requirements are adjusted by professional tuning personnel to ensure the quality of the audio. Some refit shop technicians have not been professionally trained. Usually, the device simply connects the devices, the sound field is faulty, the phase is wrong, the amplifier is not installed properly, and even a fire can be caused.
The debugging skills are not qualified to debug an important part of the sound system. Some technicians don't even understand the working principle of the device, do not use the device, have not heard the sound of real instruments such as symphony, and can correct the tone? How can I hear the problem and call up a good sound system? This requires the debugger to have a professional audio tuning knowledge, and the sound system will be adjusted to the best state when tuning.
In the e-bike market where innovative, minimalistic designs are talk of the day, we see that manufacturers are constantly looking for smart electrical wiring systems and reliable connections to support these developments. With years of experience with our e-bike customers, we have already worked successfully around themes like the integration of brake & signal, battery and number plate lighting, high power electrical connection.
Related products:bike wire assembly, ebikes connector,e-bike cable assemblies, waterproof e-bike cable, waterproof e-bike connector
bike wire assembly, ebikes connector,e-bike cable assemblies, waterproof e-bike cable, waterproof e-bike connector
ETOP WIREHARNESS LIMITED , https://www.oemmoldedcables.com