The country's weight! China's autonomous amphibious aircraft AG600 is about to fly first

The self-developed large-scale civil helicopter AC313 has just successfully completed the test of airworthiness in the test of heavy rain. China Aviation Industry Corporation announced today that the same aircraft AG600, a large-scale amphibious aircraft independently developed by China, is currently preparing for the final preparation before the first flight. It will fly first in the first half of this year.

AG600 is one of the three large Chinese aircraft swordsmen (the other two are large transport aircraft transport-20 and large passenger aircraft C91), is China's own design and development of large-scale firefighting, water rescue amphibious aircraft, mainly for the implementation of special amphibious tasks, including emergency Rescue, forest firefighting, marine patrols, etc.

It has a total of more than 50,000 structures and system components and nearly 1.2 million standard parts. 98% of the structure and system parts are provided by domestic suppliers; 90% of all on-board products are made in China and must meet the requirements of civil aircraft. Aviation Management Regulations.

Of particular importance is that it can accommodate 75% of the South China Sea’s sea conditions, and it can even hover over Zengmu’s darkest sand at the southernmost point.

AC600 is also the world's largest amphibious aircraft, with a maximum take-off weight of 53.5 tons, a total length of 36.9 meters, a wingspan of 38.8 meters, a single hull and cantilever-mounted monoplane layout, four WJ-6 engines, and the first three points. Retractable landing gear.

AG600 was docked on July 17, 2015. The final assembly was completed on July 23, 2016. Joint test was completed on December 30. All four engines were successfully tested on February 13, 2017.

At present, before the resonance test, aircraft manufacturing conformity inspection check-ups, on-board tests such as aircraft resonance tests, ground taxi preparations, and test preparations are being steadily carried out. It is planned to achieve the first land-based flight in Zhuhai in the first half of 2017 and the first in the second half of the year. fly.

The AG600 aircraft has obtained 17 intentional orders so far, showing a good market prospect.

HIFU Piezoelectric Ceramic Parts

High Intensity Focused Ultrasound (HIFU) technology is to focus ultrasound on a single point to produce high energy, function on the dermis and SMAS layer of skin, stimulate the proliferation and recombination of collagen, effectively achieve the effect of compact contour and smoothing lines.

Focused ultrasound does not heat the skin surface, nor does it need to pass through the skin as a medium for the transmission of laser energy, so it does not affect the tissue on the skin surface and the tissue through which the laser passes, of course, there will be no excessive heat residue on the skin surface. In this way, the epidermis will not be affected by heat, which can reduce the Eastern people's thermal reaction easily, and greatly reduce the chance of scald. Focused ultrasoundtherapy produces thermal coagulation points in the SMAS layer, and the thermal effect diffuses outward from the coagulation points, so the heat source is concentrated in the SMAS layer to be treated. It can produce more collagen denaturation.

Ultrasonic Transducer Component,Piezo Crystal For Vibration Transducer,Piezoelectric Ultrasonic Rings,High Power Ultrasonic Machining

Zibo Yuhai Electronic Ceramic Co., Ltd. , https://www.yhpiezo.com