LED Power Out Retrofit Kits Replace 6V Incandescent Bulbs








LED Retrofit for Power Out Lights Retrofit your power out lights or Exit signs in minutes with no tools. Turn any 6V emergency light into a life saving LED light. The LED Retrofit for Power Out Lights replaces 6V wedge base incandescent bulbs.
Simply remove your existing 6V bulb Insert the LED retrofit In minutes, you have a life saving LED power out light When the power goes out due to flood, fire, hurricane, or any number of disasters which can occur in our daily lives, you can Reliance on the highly efficient LED Power Out Retrofit to greatly improve safety and the chance of rescue.
Placed in stairwells and elevators in shopping malls, commercial buildings, hospitals, apartment buildings and restaurants, the LED Power Out Retrofit will provide trapped victims ample light for a longer period of time in those frightening, desperate moments.
No tools required. The LED Power Out Retrofit installs in minutes. Simply open the housing, remove the existing light bulb, insert the plug on the LED Power Out Retrofit, and set in place. Be sure to test your light first by pressing the test Button to make sure it is in working condition. Test it again after installation of the LED Power Out Retrofit. Youll be amazed at the light output. The LED Power Out Retrofits are brighter and lasts longer than your existing incandescent bulb.


Red (Standard 5watt – 6 volt bulb)
Green (New LED Power Out Retrofit)
Incandescent light bulb looses as much as 75% of it light output as the battery drains down. An incandescent bulb uses a high amount of current so battery drain is very fast.
The LED Power Out Retrofit maintains over 95% of its full output as the battery drains. You get up to 6 hours of light with the LED Power Out Retrofit, not minutes.
In a short the LED Power Out Retrofit will provide more light, better quality light and light for a longer period of time. In a storm or power out situation, light keeps people calmer and increases the chances of a good and safe ending.
100% quality control in place. Each light is tested four times during production and once again before being packaged for shipment.
Applied for; 2 year securities against defects in materials or workmanship.



LED Power Out Retrofit, set of two replacement kits $123.00 per set and 2pcs $123.00 per set of 2 3pcs $122.00 per set of 2 4pcs $122.00 per set of 2 5pcs $121.00 per set of 2 6pcs $121.00 per set of 2 7pcs $120.00 per set of 2 8pcs $120.00 per set of 2 9pcs $119.00 per set of 2 10pcs $119.00 per set of 2 11 pcs $118.00 per set of 2 12 pcs $118.00 per set of 2

  crawler tractors are versatile,domestic initiative and technology leading. Hydraulic controlled differential - brake turn to technology , 360 degree steering wheel control and spin turn are our company`s unique advantages. In addition, our products also have the superiorities of triangular track drive, low grounding pressure and better Paddy field performance. Our company has iron Crawler Tractor and Rubber Crawler Tractor, which two main products. Every products have different types. These products are of high efficiency, long operating life. and low fuel consumption. Our crawler tractors are easy switching between hydraulic infinitely variable speed and mechanical transmission.


Model

NF-Y602

NF-Y702

NF-Y802

Size

length×width×height(mm)

2900×1360×1500

3430×1590×2300

Weight

(Kg)

1700

2200

Minimum Ground Clearance

(mm)

260

410

 

Engine

 

 

 

 

 

Model

3G25TC

YD4CZ70C1

YD4SZ80C1

Form

Electronic injection.vertical.water-cooled.four-stroke

Rated power(kW)

44.1

51.5

58.8

Fuel

Diesel

Rated power(r/min)

2400

Starting method

Electric start

Steering Brake System

 

Steerig system type

Planetary differential steering

Brake system type

Wet friction steering

Drive Train

Clutch type

Single-chip single-acting

 

Transmission type

2(mechanical file)+2×2(hydraulic stepless speed change)

 

Transmission shift model

Gear shift

Walking System

Rack form

Rigid frame type

 

Track pitch section×number×width

90×46×280

90×50×350

 

The theoretical speed of each file(km/h)

Forward:mechanical block:4.86; 8.65    Hydraulic block:0-5.75; 0-10.24

 

 

Back:0-5.75;0-10.24

Working Device

Lifter type

Semi-split

 

Tillage depth control

Force adjustment

 

PTO form

Type1,non-independent

 

Power output shaft speed(r/min)

624/960








































Model

NF-702

NF-802

NF-902

Size

length×width×height(mm)

3690×1500×2400

3690×1650×2560

Weight

(Kg)

2255

2450

Minimum Ground Clearance

(mm)

395

420

Engine

Model

YD4CZ70C1

YD4EZ80C1

YD4EZ90C1

Form

Electronic injection.vertical.water-cooled.four-stroke

Rated power(kW)

51.5

58.8

66.2

Fuel

Diesel

Rated power(r/min)

2400

Tarting method

Electric start

Steering Brake System

Steerig system type

Planetary differential steering

Brake system type

Wet friction steering

Drive System

Clutch type

Single-chip single-acting

Transmission type

Eight forward speed+ reverse gear

Transmission shift model

Gear shift

Walking System

Rack form

Rigid frame type

Track pitch section×number×width

90×51×400

90×56×400

The theoretical speed of each file(km/h)

Ahead:1.22;1.80;2.92; 3.84;5.50;8.08;13.13;17.25

Backward:0.97;1.43;2.32;3.04;4.36;6.41;10.42;13.68

Working Device

Lifter type

Semi-split

Tillage depth control

Force adjustment

PTO form

Type1,non-independent

Power output shaft speed(r/min)

720/1000

PTO shaft spline and the outer diameter mm

8×38



Model

NF-Q502

NF-Q602

NF-Q702

NF-Q802

Size

length×width×height(mm)

3430×1590×2300

Weight

(Kg)

1715

1890

1930

1990

Minimum Ground Clearance

(mm)

395

Engine

Model

YD4C50V1

YD4JZ60C1

YD4CZ70C1

YD4SZ80C1

 

Form

electronic injection.vertical.water-cooled.four-stroke

 

Rated power(kW)

36.8

44.1

51.5

58.8

 

Fuel

diesel

 

Rated speed(r/min)

2400

 

Starting method

Electric start

Steering Brake System

Steerig system type

Tooth embedded clutch-braking

 

brake system type

Wet friction type

Drive System

clutch type

Monolithic single-acting

 

transmission type

Main transmission (hydraulic stepless speed + mechanical gear)

+auxiliary transmission 2 files

 

transmission shift model

Gear shift

Walking System

rack form

Rigid frame type

 

track pitch section×number×width

90×46×350(with side teeth)

90×50×350(with side teeth)

 

the theoretical speed of each file(km/h)

Hydraulic:high0-9.2;low0-6.2

 

 

mechanical:8.2;5.3

Working Device

lifter type

Semi-split type

 

tillage depth control

Bit adjust(optional force adjust)

 

PTO form

Type1, non-independent

 

power output shaft speed(r/min)

620/960

 

PTO shaft spline and the outer diameter mm

8×38



If you have any questions, please contact with us directly. Crawler tractors are produced

by our company with high quality and good appearance. Welcome you can visit our factory.for

inqury,Please send mail directly to us!



Crawler Tractor

Crawler Tractor,Light Crawler Tractor,Tractor With Low Ground Pressure,Multifunctional Crawler Tractor

Hunan NongFu Machinery&Electronic.Co., Ltd. , http://www.nfagmachine.com